Connecting rod forming process comprises billet compression and deformation by closed impression die forming process. The upper half section of the connecting rod is impressed on the upper die while lower half of the connecting rod is impressed on the lower die. Right hand side of video shows initial, pre formed and final billet and lower half shows the dies. Considering various parameters and maintaining temperature of billet to 1250oC the forming of connecting rod take place. The material of the billet is manganese alloy steel. Hydraulic press is used to deform the billet. The upper die with hydraulic press compresses the billet with very high force in downward direction and deforms it. Due to high deforming force and high billet temperature, material starts deforming plastically and moves into the impressions created in the upper and lower die. At the final height the billet is deformed into semi-finished connecting rod. Final shape is obtained after various heat treatment processes and machining of the semi-finished connecting rod. Final connecting rod is shown at the end.